Gas Storage Hot Water Systems Perth

Straightforward replacements. Reliable hot water.

Need to replace an ageing or faulty gas storage hot water system?

We supply and install quality gas storage water heaters across Ellenbrook and Perth’s northern and northeastern suburbs.

For many homes, the Everhot 135L 4-star is a practical and economical replacement for an existing gas storage system.

Typical replacement: approximately $2,495 installed, including GST.

This indicative price covers a standard replacement. Additional plumbing, gas supply changes, difficult access or other site requirements may affect the final cost.

Everhot 135L 4 Star natural gas storage hot water system installed beside a cream brick home in Ellenbrook, with insulated pipework and new plumbing valves.

Everhot 135L natural gas storage hot water system installed against a baby blue rendered exterior wall, with black window frames, fascia and gutters visible.
Everhot 135L 4 Star natural gas storage hot water system installed against a red brick wall at a residential property, believed to be in Ellenbrook, Western Australia.

Everhot 135L 4-Star Gas Storage Hot Water System

Our preferred replacement for many existing gas storage water heaters.

When replacing an older gas storage system, we often recommend the Everhot 135L 4-star.

Manufactured by Rheem for Reece, Everhot offers a practical balance of purchase price, energy efficiency and hot water performance.

Its familiar design makes it a suitable replacement for many older 3-star and 4-star gas storage systems, often without major changes to the existing installation.

Why We Recommend Everhot

  • 4-star energy efficiency: An improvement over many older 3-star gas storage systems.
  • 135L storage capacity: Suitable for many small and medium-sized households.
  • Strong hot water recovery: Delivers up to 248 litres of hot water in the first hour under specified conditions.
  • Straightforward replacement: Compatible with many common existing gas storage installations.
  • Manufacturer support: Backed by Rheem Manufacturing’s national service network.
  • 7-year cylinder warranty: Subject to the manufacturer’s warranty terms and conditions.

Is the Everhot 135L Right for Your Home?

For many households, the Everhot 135L provides the hot water capacity they need without paying extra for a larger or more complicated system.

However, we don’t automatically recommend the same heater for every property.

We’ll consider your existing system, household hot water demand and installation requirements before confirming a suitable replacement.


Replacing Your Existing Gas Storage Hot Water System

You don’t always need to replace your old hot water system with the same brand or model.

Many older Rheem, Dux, Everhot and other gas storage water heaters can be replaced with a suitable modern alternative.

For many common installations, our preferred Everhot 135L 4-star provides an economical solution.

Replacing an Older 3-Star Gas Storage System

The Everhot 135L 4-star is designed to replace many older 3-star gas storage heaters.

Its familiar dimensions and plumbing connections can make replacement relatively straightforward, while offering improved gas energy efficiency.

Replacing an Existing 4-Star System

If you already have a 4-star gas storage water heater, an Everhot replacement may be equally straightforward.

We’ll check your existing model, hot water requirements and installation conditions before confirming suitability.

Replacing a 5-Star or Larger Gas Storage System

Replacing a higher-rated or larger system requires a little more consideration.

A 135L Everhot may still be appropriate for some households, but we don’t recommend downsizing without checking your hot water requirements.

Where necessary, we can recommend a larger or more suitable alternative.

Not Sure What Hot Water System You Have?

Simply send us a photo of your existing water heater, including its model label if possible.

We’ll help identify a suitable replacement and explain any installation requirements before providing an estimate.


Repair or Replace Your Gas Storage Hot Water System?

Not every hot water problem means you need a new heater.

Many gas storage systems can be repaired when the tank is in good condition and the fault involves a replaceable component.

However, major repairs on an ageing system aren’t always the best investment.

When Is a Repair Worthwhile?

We regularly assess and repair common gas storage hot water faults, including:

  • Faulty thermocouples and gas control valves
  • Leaking pressure relief and isolation valves
  • Tempering valve problems
  • Anode replacement
  • Leaking external pipework and fittings

A relatively straightforward repair can sometimes extend the useful life of an otherwise serviceable system.

When Is Replacement the Better Option?

If your gas storage heater is approaching or exceeding 15 years old, major repairs may offer limited value compared with replacement.

A leaking storage tank, significant deterioration or repeated breakdowns can also make a new system the more practical choice.

We consider the age, condition and repair cost before making a recommendation.

Straightforward Advice, Whatever the Problem

Sometimes a repair is all that’s needed. Other times, investing in a new hot water system makes more financial sense.

We’ll explain the available options so you can make an informed decision.

Want to compare the cost of different hot water systems? Read our Hot Water System Replacement Cost in Perth guide for indicative installed prices and advice about choosing a suitable replacement.


Is a Heat Pump Hot Water System Worth Considering?

Replacing your existing gas storage heater is often the most affordable option upfront. However, a heat pump may offer better long-term value.

Heat pumps use electricity and energy from the surrounding air to heat water efficiently. They can also make good use of electricity generated by rooftop solar panels.

When Might a Heat Pump Make Sense?

A heat pump is worth considering if you:

  • Already have rooftop solar panels.
  • Want to reduce your household’s gas consumption.
  • Are planning gas abolishment.
  • Prefer lower running costs over the lowest upfront purchase price.
  • Intend to remain in your home for several years.

Our Preferred Heat Pump: iStore

We primarily supply and install iStore heat pump systems, with options to suit different household sizes.

Although the upfront installation cost is generally higher than a straightforward gas storage replacement, the potential running-cost savings can make it worthwhile over time.

The best choice depends on your household’s hot water use, energy tariffs, existing solar system and installation requirements.

iStore 270L heat pump hot water system installed at a Perth Hills home, replacing a failing LPG continuous flow gas unit as part of a home electrification upgrade.
iStore 180L heat pump hot water system installed on a concrete slab beside a cream brick home in The Vines, surrounded by paving, pebbles and raised garden beds.

Rheem Stellar 360 gas storage hot water system installed by Banrock Plumbing in Perth

Professional Gas Storage Installation & Aftercare

A hot water replacement involves more than installing a new tank. We take care of the practical details, from selecting a suitable system through to testing and handover.

The Right Replacement

We assess your existing heater, plumbing connections and installation conditions before recommending a suitable replacement.

Professional Installation

We complete the required plumbing and gas-fitting work, install the new system and carry out testing and commissioning.

Removal and Clean-Up

Your old hot water system and normal installation rubbish are removed where practical. We leave the work area tidy and provide the relevant documentation.

A Helpful Handover

Once the installation is complete, we’ll walk you through the new system, explain its basic components and answer any questions.

We’ll also explain what to expect while the tank reaches its normal operating temperature.

Support After Installation

If you have questions or concerns afterwards, you’re welcome to contact us directly.

We can also help coordinate manufacturer warranty enquiries and arrange appropriate service assistance when required.

Our aim is to provide dependable hot water and a straightforward experience, from your first enquiry through to the completed installation.


Gas Storage Hot Water Replacements Around Ellenbrook

Based in Ellenbrook, we provide gas storage hot water replacements and repairs across Perth’s northern and northeastern suburbs.

Our local service area includes Ellenbrook, Aveley, The Vines, Henley Brook, Brabham, Dayton, Caversham, Ballajura, Midland and surrounding communities.

Keeping our service area focused helps us provide practical scheduling, responsive service and dependable follow-up support.

Not sure whether we service your suburb? Contact us with your location and hot water requirements.


Gas Storage Hot Water FAQs

A straightforward gas storage replacement can often be completed within half a day.

More complicated installations may take longer, particularly where additional plumbing, gas-fitting work or difficult access is involved.

We’ll discuss the expected installation requirements before proceeding.

In many cases, yes.

The Everhot 135L 4-star is a practical replacement for numerous existing gas storage systems, including suitable Rheem and Dux installations.

We’ll check your current model, installation requirements and hot water demand before confirming compatibility.

That depends on the fault and the condition of the tank.

Minor repairs may still be worthwhile, particularly when the storage cylinder remains sound.

However, expensive repairs on ageing systems can offer poor value compared with replacement. We’ll help you weigh up the options.

A typical Everhot 135L 4-star supply-and-install is approximately $2,495 including GST for a standard replacement.

The final price depends on your existing installation. Additional pipework, compliance requirements, difficult access or a different system may affect the cost.

Send us a photo of your current heater and we’ll help establish a suitable replacement and indicative price.