Gas Continuous Flow Hot Water Systems Perth

Gas continuous-flow replacements made simple.

Replacing an existing gas hot water system? We supply and install selected Rinnai Infinity continuous-flow systems across Ellenbrook and Perth’s northern and northeastern suburbs.

We focus on the Rinnai Infinity B16, B20 and B26, helping you choose a suitable replacement without unnecessary complications.

Rinnai Infinity B26 natural gas continuous flow hot water system installed on an external red brick wall in The Vines, replacing a faulty Midea 26 unit.

Rinnai Infinity B16 gas continuous flow hot water system

16 litres per minute

A practical choice for smaller homes.

Ideal for many single-bathroom households with modest hot water demand.

  • 6.1-star equivalent energy rating
  • Compact, wall-mounted design
  • Natural gas and LPG models available
Rinnai Infinity B20 gas continuous flow hot water system

20 litres per minute

A little more capacity when needed.

A suitable option for homes requiring additional hot water flow without automatically moving to the largest unit.

  • 6.0-star equivalent energy rating
  • Greater flow capacity than the B16
  • Natural gas and LPG models available
Rinnai Infinity B26 gas continuous flow hot water system

26 litres per minute

For households with greater hot water demand.

Our higher-capacity option for suitable two-bathroom homes and larger existing continuous-flow installations.

  • 6.0-star equivalent energy rating
  • Higher flow capacity for simultaneous hot water use
  • Natural gas and LPG models available

Still using an older Bosch Pilot or HydroPower hot water system?

We can help you choose a suitable replacement, including a like-for-like Bosch instantaneous heater or a modern Rinnai Infinity B12.

Like-for-like Bosch replacement

For suitable installations, replacing an older Bosch with a comparable model can be a straightforward and economical option.

Upgrading to Rinnai Infinity B12

A Rinnai Infinity B12 offers electronically controlled continuous-flow hot water. However, upgrading from an older mechanical Bosch may require changes to the gas supply, pipework or electrical arrangements.

We’ll assess what’s practical before recommending a replacement.

Not sure what you’ve got? Send us a photo of your existing hot water system, and we can help identify your options.

Choosing the Right Continuous-Flow Replacement

Not every continuous-flow hot water system can be replaced with a larger model without additional work.

Before recommending a replacement, we consider three important factors.

Gas Supply

Your existing gas pipework and gas supply must have sufficient capacity for the new water heater and other connected gas appliances.

Upgrading to a higher-capacity unit may require changes to the installation.

Household Hot Water Demand

The right system depends on how many bathrooms you have and how often hot water is used simultaneously.

A larger system isn’t always necessary, particularly when an appropriately sized replacement will already meet your needs.

Installation Requirements

We consider existing plumbing connections, water pressure, electrical supply, appliance location and required clearances.

Changing brands or models can sometimes involve additional installation work.

Our approach is simple: recommend a suitable replacement, explain any necessary work and provide clear pricing before proceeding.


Thinking About Switching from Gas Storage to Continuous Flow?

Converting from a traditional gas storage hot water system to continuous flow is possible, but it isn’t always a straightforward upgrade.

Continuous-flow systems can require significantly more gas while operating than a typical gas storage heater. Depending on your existing installation, upgrading the gas pipework may be necessary.

These additional costs can make a conversion considerably more expensive than a standard replacement.

Before committing to a conversion, it’s worth comparing your options:

We can help you understand the practical differences and choose a suitable replacement for your property.


Rheem Stellar 360 gas storage hot water system installed by Banrock Plumbing in Perth

How Much Does Continuous Flow Replacement Cost?

The cost of replacing a gas continuous-flow hot water system depends on the model you choose and the requirements of your existing installation.

A straightforward like-for-like replacement will generally cost less than an installation requiring changes to gas pipework, electrical supply or appliance location.

What’s Included in a Standard Replacement?

Our typical supply-and-install service includes:

  • Supply of your selected Rinnai continuous-flow hot water system
  • Professional plumbing and gas-fitting installation
  • Standard connection materials and fittings
  • Installation testing and commissioning
  • Removal and disposal of your old hot water system where practical
  • An explanation of your new system and its basic operation

What Might Increase the Cost?

Additional work may be required for:

  • Gas pipework upgrades
  • Changes to existing plumbing connections
  • New or relocated electrical outlets
  • Relocating the hot water system
  • Difficult access or additional compliance requirements

We’ll explain any necessary work and provide a clear estimate before proceeding.

Want to know what your replacement will cost?

Send us a photo of your existing hot water system, including the surrounding pipework and installation area. We’ll help establish a suitable replacement and indicative installed price.

Want to compare installation costs across different hot water systems? Our Hot Water System Replacement Cost in Perth guide provides indicative installed prices for gas storage, continuous-flow and heat pump systems.

Professional Hot Water Installation, From Start to Finish

Replacing your hot water system should be straightforward. We take care of the installation details so you can get back to enjoying reliable hot water.

The Right System for Your Home

We assess your existing unit, plumbing and gas supply before recommending a suitable replacement.

Professional Installation

Your new system is installed, tested and commissioned, with the required plumbing and gas-fitting work completed to applicable standards.

A Clean and Tidy Finish

We remove your old hot water system and normal installation rubbish where practical, leaving the work area tidy.

Helpful Advice and Aftercare

Once your new system is installed, we’ll explain its basic operation and answer any questions.

If you need assistance afterwards, you can contact us directly. We can also help coordinate manufacturer warranty enquiries when required.


Continuous Flow Hot Water Replacements Around Ellenbrook

Based in Ellenbrook, we provide specialist hot water replacement services across Perth’s northern and northeastern suburbs.

Our preferred service area includes Ellenbrook, Aveley, The Vines, Henley Brook, Brabham, Dayton, Caversham, Ballajura, Midland and surrounding communities.

We also consider suitable replacement work in other northern suburbs, including areas around Wanneroo, Balcatta and Bullsbrook.

Keeping our service area focused helps us provide practical scheduling, responsive service and dependable follow-up support.

Not sure if we service your suburb? Get in touch with your location and hot water requirements.


Frequently Asked Questions

Often, yes. However, the installation must have suitable gas supply capacity, water conditions and electrical arrangements.

For some older Bosch installations, a like-for-like Bosch replacement may be more economical. We can help assess both options.

Possibly. A larger system has a greater maximum gas demand, so the existing gas supply and pipework must be assessed first.

We also consider whether your household needs the additional capacity.

A straightforward replacement can often be completed within half a day.

Installations requiring gas pipework upgrades, electrical work or relocation may take longer. We’ll discuss the expected work before proceeding.

We assess some older instantaneous systems, particularly suitable mechanical Bosch units.

For modern electronic continuous-flow systems, manufacturer-authorised or specialist technicians are often better equipped to diagnose internal faults.

If your system is ageing, we can also discuss whether replacement represents better value than repair.

For information about the types of hot water faults we can assist with, visit our Hot Water System Repairs Perth page.