How Much Does It Cost to Replace a Hot Water System in Perth?

Updated October 2026

Replacing a household hot water system in Perth can cost anywhere from around $2,000 to $5,000 or more, depending on the system and installation requirements.

For example, a standard 135L Everhot gas storage hot water system costs approximately $2,495 supplied and installed, including GST, for a typical like-for-like replacement.

Other options, such as gas continuous-flow systems and heat pumps, have different upfront costs. The right choice depends on your existing system, household needs and long-term priorities.

The good news is that replacing an existing system is often simpler and more affordable than changing to a completely different type.

Below, we explain typical replacement prices in Perth, what installation costs include and which factors can affect your final quote.


Typical Hot Water System Replacement Prices in Perth

The table below provides indicative supply-and-install prices for common hot water system replacements in Perth.

These figures include GST and assume a reasonably straightforward installation. Your final price will depend on the existing system, site access and any additional work required.

Hot Water SystemIndicative Installed Price
Everhot 135L Gas StorageAround $2,495
Other Gas Storage Systems$2,495-$3,995
Gas Continuous Flow (Rinnai)$1,995-$4,800
iStore Heat Pump$3,995-$4,995*
Electric StorageQuoted Individually

Prices indicative as at October 2026. All prices are in Australian dollars and include GST.

Heat pump pricing assumes applicable Small-scale Technology Certificates (STCs) are assigned to us, with their value reflected in the installed price. Eligibility and installation requirements apply.

These prices are a starting point, not fixed quotes. Straightforward like-for-like replacements are generally more affordable than system conversions or relocations.

Not sure which system suits your home? We can help you compare the cost of replacing your existing unit with a suitable alternative.


What Affects the Cost of Replacing a Hot Water System?

No two hot water installations are exactly alike. While many replacements are straightforward, several factors can influence the final price.

Understanding these differences can help you budget accurately and avoid unexpected costs.

1. The Type of Hot Water System

Replacing your existing hot water system with a similar model is usually the most economical option.

For example, replacing an older gas storage unit with a modern Everhot gas storage system often requires relatively few changes to the existing connections.

Switching from gas storage to continuous flow or a heat pump may involve additional plumbing, electrical or gas-fitting work.

2. System Size and Capacity

Larger hot water systems generally cost more to purchase than smaller models.

A household with higher hot water demand may need a larger storage tank or a continuous-flow system with a higher flow rate.

However, bigger isn’t always better. Choosing the right size helps balance upfront costs, everyday performance and energy consumption.

3. Installation Location and Accessibility

Hot water systems installed at ground level with clear access are generally easier and more affordable to replace.

Additional labour or equipment may be needed when:

  • The system is located in a confined space.
  • Gates, pathways or landscaping restrict access.
  • The old unit is difficult to remove.
  • The replacement requires a new location or mounting arrangement.

We’ll consider these factors when assessing your installation.

4. Plumbing, Gas and Electrical Requirements

Some replacements need additional work to meet current installation requirements.

Depending on the property and system, this may include:

  • Replacing ageing or unsuitable valves and pipework.
  • Upgrading gas pipework where required.
  • Installing or modifying electrical connections.
  • Adjusting drainage or temperature-control arrangements.
  • Making other changes necessary for a compliant installation.

A standard like-for-like replacement generally involves fewer modifications than changing to a different type of hot water system.

5. Removing and Disposing of the Old System

Removing the existing hot water system and disposing of it is normally included in our standard replacement price.

Unusual removal requirements, such as difficult access or the need for specialised lifting equipment, may increase the cost.

The bottom line: Most straightforward replacements can be priced reasonably accurately once we know your existing system, its location and what you want to replace it with.


Gas Storage Hot Water Replacement Costs

Gas storage hot water systems remain one of the most affordable options to replace in Perth, particularly when your home already has a gas storage unit installed.

For many households, replacing an ageing gas storage system with a modern equivalent offers a practical balance of purchase price, reliability and hot water capacity.

How Much Does a Gas Storage Replacement Cost?

A standard 135L Everhot 4-star gas storage hot water system costs approximately $2,495 supplied and installed, including GST.

This indicative price covers a typical like-for-like replacement with suitable existing connections and reasonable access.

Larger systems, difficult access or additional installation requirements may increase the price.

Do You Need to Change to a Different System?

Not necessarily. If your existing gas storage system has served your household well, replacing it with a similar unit is often the simplest and most economical solution.

Upgrading from an older 3-star or 4-star gas storage system to a modern 4-star model can also offer improved energy efficiency, depending on the unit being replaced.

However, if you’re considering reducing your household’s gas consumption, a heat pump may be worth comparing before making a decision.

Our Approach to Gas Storage Replacements

We generally recommend Everhot 4-star gas storage systems for suitable replacements because they offer good value without the expense of changing to a different hot water technology.

We’ll assess your existing system, household requirements and installation conditions before recommending a suitable replacement.

For more information about available sizes, installation requirements and system features, see our Gas Storage Hot Water Systems Perth guide.


Gas Continuous Flow Hot Water Replacement Costs

Gas continuous-flow systems heat water as you use it, rather than storing it in a tank. They’re a popular choice for Perth households that already have continuous-flow hot water installed.

Rinnai B20 continuous flow gas hot water system installed in Aveley, connected to a whole-house water filtration system with twin filter housings and insulated pipework.
Rinnai B20 continuous flow hot water system installed in Aveley, connected to a twin-cartridge whole-house water filtration system.

A gas continuous-flow replacement typically costs between $1,995 and $4,800 supplied and installed, depending on the model and installation requirements.

Straightforward like-for-like replacements are generally the most affordable.

Replacing an Existing Continuous Flow System

If your home already has a gas continuous-flow unit, replacing it with a modern equivalent is often relatively straightforward.

We primarily supply and install Rinnai Infinity and B Series continuous-flow systems, including 16L, 20L and 26L models.

The most suitable model depends on your household’s hot water demand, the existing gas supply and installation conditions.

Replacing an older unit may also require changes to pipe connections, mounting arrangements or other components to meet current installation requirements.

Converting From Gas Storage to Continuous Flow

Changing from a gas storage tank to continuous flow is usually more involved than a like-for-like replacement.

Continuous-flow systems can have significantly higher gas input requirements than storage heaters. This means the existing gas pipework may not be suitable.

A conversion may require larger gas pipes, additional plumbing modifications and other installation work.

These costs can make a straightforward gas storage replacement considerably more economical.

Is Continuous Flow Right for Your Home?

Continuous-flow systems can be an excellent option when replacing an existing unit, particularly for households that value compact equipment and heating water on demand.

However, they’re not automatically the most economical choice for every property.

If you already have gas storage, we can help you compare the cost of a suitable replacement against other options before committing to a change.

For more information, visit our Gas Continuous Flow Hot Water Systems Perth page.


Heat Pump Hot Water Replacement Costs

Heat pump hot water systems are becoming an increasingly popular alternative to traditional gas and electric storage systems in Perth.

An iStore heat pump typically costs between $3,995 and $4,995 supplied and installed, including GST and applicable Small-scale Technology Certificate (STC) incentives.

Although heat pumps cost more upfront than conventional gas storage systems, their energy efficiency can make them an attractive long-term investment.

iStore 270L heat pump hot water system installed at a home in Jane Brook, replacing an existing gas storage water heater.

How Much Does an iStore Heat Pump Cost?

We primarily recommend and install iStore heat pumps in two popular sizes:

  • 180L iStore: A compact option suited to smaller households and moderate hot water demand.
  • 270L iStore: A larger system suited to families and households with higher hot water requirements.

The final installation price depends on the system size, location, existing plumbing and any electrical work required.

Can a Heat Pump Save Money?

Heat pumps use electricity to extract heat from the surrounding air and transfer it into stored water.

This process uses considerably less electricity than conventional electric resistance water heating.

For households replacing gas hot water, the potential savings depend on gas and electricity tariffs, household usage and whether rooftop solar power is available.

Homes with solar panels may benefit from scheduling their heat pump to operate during daylight hours, using more of their own solar-generated electricity.

Are Government Incentives Available?

Eligible heat pump installations can benefit from federal Small-scale Technology Certificates (STCs).

The value of these certificates can reduce the upfront purchase and installation cost.

Our indicative iStore prices already account for applicable STC incentives, so you won’t need to calculate these separately when comparing options.

Eligibility and the final certificate value depend on the system and installation circumstances.

Is a Heat Pump Worth the Extra Cost?

If your main priority is the lowest upfront replacement cost, a suitable gas storage system may be the better choice.

However, if you plan to stay in your home for several years, a heat pump may offer better long-term value through reduced energy consumption.

We can help you compare both options based on your existing system, household requirements and budget.

Learn more in our Heat Pump Hot Water Systems Perth guide.


Is It Cheaper to Repair or Replace Your Hot Water System?

Not every hot water problem means you need a new system. In many cases, a relatively straightforward repair can restore your hot water at a fraction of the replacement cost.

However, repairing an ageing system isn’t always the most economical choice.

The right decision depends on the age of your hot water system, the nature of the fault and the likely cost of repairs.

When Is Repairing a Hot Water System Worthwhile?

Repairs are often worthwhile when the storage tank is in good condition and the problem involves a replaceable component.

Common examples include:

  • Faulty tempering valves that affect hot water temperature.
  • Leaking pressure relief valves.
  • Failed thermocouples or gas control components.
  • Leaking or damaged external pipework.
  • Anode replacement and other suitable maintenance work.

A properly assessed repair can extend the useful life of your existing hot water system without the expense of replacing it.

When Is Replacement the Better Investment?

Replacement becomes more attractive when the system is approaching the end of its expected service life or requires expensive repairs.

Warning signs include:

  • Water leaking from the storage tank itself.
  • Significant corrosion or deterioration.
  • Repeated breakdowns or multiple failing components.
  • Major repair costs on an ageing system.
  • A system that no longer meets your household’s needs.

For gas storage systems approaching or exceeding 15 years of age, we generally recommend considering replacement before investing in major repairs.

However, age alone doesn’t determine whether a repair is worthwhile. We assess each situation individually.

What About Continuous Flow and Heat Pump Repairs?

Modern gas continuous-flow systems can require specialist diagnostic equipment and manufacturer-specific components. For these faults, an authorised service technician may be the most appropriate option.

Heat pump systems may also require specialist electrical or refrigeration repairs.

We can assist with suitable plumbing and storage-side repairs, while more specialised faults may need to be referred to an appropriately qualified technician.

Get Advice Before Replacing Your System

If you’re unsure whether to repair or replace your hot water system, we can help you understand the available options.

Our aim is to recommend a practical solution based on the condition of your system, the likely repair cost and the price of a suitable replacement.

For more information, visit our Hot Water System Repairs Perth page.


What’s Included in a Standard Hot Water System Replacement?

When comparing hot water system prices, it’s important to understand what’s included in the installation.

A cheaper advertised price isn’t necessarily better value if essential installation work, removal or disposal costs are charged separately.

Our standard hot water replacement pricing generally includes the following.

Supply of the New Hot Water System

We supply a suitable hot water system selected for your household’s requirements.

This includes helping you choose the right capacity and model, rather than simply replacing your old unit with whatever happens to be available.

Professional Installation

Your new hot water system is installed by a licensed plumbing professional, with gas-fitting work completed where applicable.

A typical replacement includes:

  • Disconnecting the existing hot water system.
  • Removing the old unit from its position.
  • Positioning and connecting the replacement system.
  • Installing or replacing standard valves and fittings as required.
  • Checking the completed installation for correct operation.
  • Completing applicable installation and compliance documentation.

Any additional work outside a standard replacement will be discussed as part of your quote.

Removal and Disposal of the Old System

For most straightforward replacements, we remove and dispose of your old hot water system as part of the installation.

We also remove normal installation waste and leave the work area tidy.

Unusually difficult removals or specialised lifting requirements may involve additional costs.

Testing and Customer Handover

Once your new hot water system is installed, we’ll check its operation and explain the basic controls and components.

We’ll also show you where to find relevant product information and explain any important maintenance considerations.

You can contact us if you have questions about your new system after installation.

Manufacturer Warranty and After-Sales Support

New hot water systems come with manufacturer warranties, which vary depending on the brand, model and component.

We’ll provide the relevant warranty information and can assist with coordinating warranty enquiries through the appropriate supplier or authorised service agent.

Our service doesn’t simply end when the new hot water system is switched on. We want you to feel confident using your new system and know who to contact if you need assistance.

Clear Pricing Before Work Begins

Where possible, we’ll establish the installation requirements before providing your quote.

If your property requires additional plumbing, gas or electrical work beyond a standard replacement, we’ll explain what’s involved and how it affects the price.

Our aim is simple: a suitable hot water system, professionally installed, with clear pricing and practical support afterwards.


How to Get an Accurate Hot Water Replacement Quote

Getting an accurate quote for a replacement hot water system is often easier than you might think.

For many straightforward replacements, we can provide an indicative price once we know a few details about your existing system and installation location.

1. Tell Us Where You’re Located

Let us know which Perth suburb you’re in.

We primarily service Ellenbrook and surrounding northern and northeastern Perth suburbs, including Aveley, The Vines, Brabham, Henley Brook, Ballajura, Midland and nearby areas.

We also consider suitable jobs throughout our wider service area.

2. Tell Us About Your Existing Hot Water System

If possible, let us know:

  • Whether you have gas storage, gas continuous flow, electric storage or a heat pump.
  • The brand and model of your existing system.
  • Approximately how old it is, if known.
  • Whether the system has stopped working, is leaking or simply needs replacing.

Don’t worry if you’re unsure about the model. We can often identify it from a photo.

3. Send Us a Few Photos

Photos can help us assess the installation and provide a more accurate initial estimate.

The most useful photos show:

  • The complete existing hot water system.
  • The manufacturer’s label, including the model number.
  • The surrounding area, including access and pipework.

These details can help identify any potential installation complications before arranging a visit.

4. Discuss Your Replacement Options

Once we understand your existing setup, we can recommend a suitable replacement and explain the expected cost.

We’ll generally start with a straightforward, economical replacement option.

If you’re interested in alternatives, such as a more energy-efficient heat pump, we can also explain the difference in upfront cost and potential long-term benefits.

Where a site inspection is necessary, we’ll discuss that with you before proceeding.

Need Hot Water Replaced?

Whether your system has failed completely or you’re planning ahead, we’re happy to discuss your options.

Call 0447 081 768 or use our contact form to tell us about your existing system.

We’ll help you understand your replacement options, likely costs and the next practical steps.


Frequently Asked Questions About Hot Water Replacement Costs

A straightforward hot water system replacement in Perth typically costs around $2,000 to $5,000, depending on the system type, capacity and installation requirements.

For example, a standard Everhot 135L gas storage replacement costs approximately $2,495 supplied and installed, including GST.

Replacing your existing hot water system with a similar model is usually the most affordable option.

If you already have gas storage, a like-for-like gas storage replacement will generally cost less than converting to a heat pump or continuous-flow system.

The cheapest suitable option depends on your existing installation.

Many straightforward hot water system replacements can be completed within half a day.

More complicated installations, system conversions or jobs requiring additional electrical work may take longer.

The timeframe also depends on system availability and the work required at your property.

Sometimes. If your system is ageing, showing signs of deterioration or requiring repeated repairs, replacing it proactively can help avoid an unexpected loss of hot water.

However, a well-maintained system that’s operating reliably doesn’t necessarily need replacing simply because of its age.

Yes, although changing system types can involve additional installation costs.

For example, replacing gas storage with a heat pump may require plumbing modifications and a suitable electrical connection.

Converting gas storage to continuous flow may require gas pipework upgrades, making it considerably more expensive than a straightforward replacement.

Often, yes.

For straightforward replacements, we can usually provide an indicative price based on your existing system, location and a few photographs.

If the installation is unusual or requires further assessment, a site inspection may be necessary before confirming the final price.

Yes, removal and disposal of the existing unit are normally included in our standard replacement pricing.

Unusual access conditions or specialised removal requirements may involve additional costs.

Heat pumps can offer lower running costs than gas storage systems, particularly when paired with rooftop solar.

However, actual savings depend on household hot water usage, electricity tariffs, gas charges and the system’s operating schedule.

Comparing both installation and ongoing energy costs is the best way to assess long-term value.


Similar Posts