Hot Water System Repairs Perth

Get the right advice before replacing your hot water system

No hot water, a leaking valve or a pilot light that won’t stay on doesn’t always mean you need a new system.

We repair common hot water faults across Ellenbrook and Perth’s northern and northeastern suburbs, with a particular focus on gas storage hot water systems.

We’ll assess the problem and let you know whether a repair makes sense. If your system is too old or the repair is unlikely to be worthwhile, we can also explain your replacement options and costs.

Need help with your hot water system?
Call 0447 081 768 or send us the details of your system and the problem you’re having.


Hot Water Systems We Repair

Not every hot water problem requires a complete system replacement. Many common faults involve valves, controls or plumbing components that can be repaired or replaced.

We focus on practical, cost-effective repairs that help you get more life from your existing hot water system.

Gas Storage Hot Water Repairs

Gas storage systems are our main repair specialty. We diagnose and repair a wide range of common faults, including leaking valves, pilot light problems and faulty gas controls.

We also replace anodes, thermocouples and other serviceable components where a repair is worthwhile.

Electric Storage Hot Water Repairs

We can assist with selected plumbing-related repairs on electric storage systems, including leaking pipework, tempering valves, isolation valves and pressure relief valves.

Electrical faults involving thermostats, heating elements or wiring require a licensed electrician.

Heat Pump Hot Water Repairs

We carry out selected plumbing-side repairs on heat pump hot water systems, including valves, connections and suitable storage-tank components.

Electrical, electronic and refrigeration faults generally require an appropriately qualified specialist or authorised service technician.

What About Continuous Flow and Solar?

Continuous-flow systems generally require specialist diagnostic equipment and manufacturer-specific servicing. We may assist with selected older models, but modern units are usually best assessed by an authorised service technician.

We don’t undertake roof-mounted solar hot water repairs. Some accessible ground-level components of split solar systems may be serviceable following an assessment.


Common Hot Water Problems We Can Help With

Hot water systems can develop a range of problems as they age. Some faults are relatively straightforward to repair, while others may indicate that your system is approaching the end of its useful life.

Here are some of the common issues we can assess and repair.

No Hot Water or Pilot Light Problems

If your gas storage system isn’t heating, the problem could involve the pilot light, thermocouple or gas control valve.

We can investigate the fault and determine whether a repair is practical.

Leaking Hot Water Valves

Dripping pressure relief valves, leaking isolation valves and faulty tempering valves are common repair jobs.

In many cases, these components can be replaced without replacing the entire hot water system.

Water Temperature Problems

Water that’s too hot, not hot enough or inconsistent in temperature may indicate a tempering valve or another system fault.

We can check the plumbing-side components and recommend a suitable solution.

Leaking Pipes and Connections

Leaks around hot water systems don’t always mean the tank has failed.

Damaged connections, fittings and nearby pipework can often be repaired or replaced independently of the heater.

Hot Water System Maintenance

Storage hot water systems contain components that require periodic inspection or replacement.

We can assess anodes, valves and other serviceable components to help maintain reliable operation.

Ageing or Deteriorating Hot Water Systems

An older system may develop repeated faults, corrosion or other signs of deterioration.

We’ll assess its condition and help you decide whether another repair is worthwhile or replacement offers better value.


Should You Repair or Replace Your Hot Water System?

Not every hot water fault justifies replacing the entire system. Equally, spending hundreds of dollars repairing an ageing unit isn’t always the best investment.

We’ll consider the system’s age, overall condition, repair cost and expected remaining lifespan before recommending a course of action.

When a Repair Makes Sense

A repair is often worthwhile when:

  • Your hot water system is relatively young and otherwise in good condition.
  • The problem involves a replaceable valve, thermocouple or plumbing component.
  • The repair cost is reasonable compared with replacing the system.
  • The tank is sound and there are no significant signs of deterioration.
  • The repair is likely to provide reliable service for years to come.

When Replacement May Be Better Value

Replacing your system may be the more practical option when:

  • Your storage hot water system is approaching or exceeding 15 years of age.
  • The tank itself is leaking or showing significant corrosion.
  • Several components are failing or repairs are becoming frequent.
  • A major repair represents a substantial portion of the replacement cost.
  • You’re considering upgrading to a more efficient hot water system.

Clear Advice Before You Decide

We don’t believe in replacing a perfectly serviceable hot water system unnecessarily.

If a straightforward repair is likely to provide good value, we’ll explain your options. If replacement makes more financial sense, we can provide an indicative installed price so you can make an informed decision.

Sometimes the right solution is to keep your existing system running a little longer. Other times, a new system offers better long-term value and peace of mind.


Gas Storage Hot Water System Repairs

Gas storage hot water systems are generally straightforward to maintain and repair when the storage tank is still in good condition.

We specialise in diagnosing and repairing common faults on gas storage systems, including Everhot, Rheem, Dux and other established brands.

Old corroded HT55 hot water pressure and temperature relief valve beside a new brass replacement valve, showing the difference between worn and new components.

Common Gas Storage Repairs

Our gas storage repair services include:

  • Thermocouple replacement – Addressing faulty thermocouples that prevent the pilot light from staying alight.
  • Gas control valve replacement – Diagnosing and replacing faulty gas controls where economically worthwhile.
  • Pressure relief valve replacement – Replacing faulty or excessively leaking relief valves.
  • Tempering valve replacement – Correcting water temperature problems caused by faulty tempering valves.
  • Isolation valve replacement – Repairing leaking or defective water isolation valves.
  • Anode replacement – Inspecting and replacing sacrificial anodes where appropriate to help protect the storage tank.
  • Pipework and connection repairs – Fixing leaks around the hot water system’s plumbing connections.

Keeping Your Existing System Running

Many of these faults can be repaired without replacing the complete hot water system.

However, the age and condition of the tank are important. For older systems, we’ll weigh the cost of repairs against the benefits of installing a replacement.

Our aim is to recommend a practical solution that makes financial sense for your circumstances.

If your gas storage system is approaching the end of its useful life, replacing it may be more economical than carrying out major repairs.

Our Gas Storage Hot Water Systems Perth page explains the replacement options available, including Everhot 4-star systems.


What’s Included in a Hot Water Service?

Depending on your system’s age, condition and manufacturer requirements, maintenance may include:

Old depleted hot water system sacrificial anode covered in corrosion and mineral deposits, compared with a new replacement anode.
Old versus new: A severely depleted sacrificial anode compared with its replacement. Regular anode maintenance helps protect storage hot water tanks against internal corrosion.
  • Anode inspection and replacement – Checking the sacrificial anode that helps protect suitable storage tanks against corrosion.
  • Pressure relief valve checks – Inspecting safety valves for leaks, deterioration and correct operation.
  • Tempering valve checks – Assessing the valve responsible for controlling delivered hot water temperature.
  • Pipework and connection inspections – Looking for leaks, corrosion and signs of deterioration.
  • General system assessment – Checking accessible components and identifying potential maintenance or repair requirements.

How Often Should a Hot Water System Be Serviced?

For many storage hot water systems, a major service approximately every five years is a useful general guideline.

However, maintenance requirements vary between manufacturers and models. Some components require more frequent inspection or replacement, particularly in areas with challenging water conditions.

We recommend following your manufacturer’s maintenance schedule and arranging an assessment if you notice unusual leaks, temperature changes or other signs of trouble.

Is Your Hot Water System Due for a Service?

If you’re unsure when your system was last serviced, we can help assess its condition and recommend suitable maintenance.

Regular servicing is particularly worthwhile when your storage tank is in good condition and you intend to keep it operating for years to come.


When Replacing Your Hot Water System Makes More Sense

Sometimes repairing an older hot water system simply isn’t worth the expense. If your storage tank has failed or a major repair is unlikely to provide lasting value, we can help you choose a suitable replacement.

We focus on reliable, practical hot water solutions without overwhelming you with unnecessary options.

Your Hot Water Replacement Options

Everhot 4 Star 135L natural gas storage hot water system shown from the front against a plain white background.

Gas Storage Hot Water Systems

If you’re replacing an existing gas storage system, a modern 4-star gas storage unit is often the simplest and most affordable option.

A like-for-like replacement can usually be completed without major changes to your home’s plumbing.

iStore 270L Air to Energy heat pump hot water system, silver cylindrical storage tank with black heat pump housing, shown against a white background.

Heat Pump Hot Water Systems

If you’re considering moving away from gas, an energy-efficient heat pump may offer better long-term value.

Heat pumps can be particularly attractive for households with rooftop solar panels or those looking to reduce their reliance on gas.

Rinnai Infinity B20 gas continuous flow hot water system

Continuous Flow Gas Hot Water

Replacing an existing continuous flow unit is generally more straightforward than converting from gas storage.

Best suited to: Homes already using continuous flow gas hot water.

What If You Need Hot Water While Waiting?

We understand that being without hot water can be inconvenient, particularly for busy households.

For eligible customers purchasing a replacement system through us, we may be able to provide a complimentary temporary electric hot water unit while awaiting installation.

This service is subject to availability and suitable installation conditions.

Clear Pricing Before You Commit

We’ll explain the recommended replacement, provide an indicative installed price and discuss any additional work your installation might require.

Our aim is to help you make an informed decision without unnecessary complications.

Wondering how much a replacement might cost? Our Hot Water System Replacement Cost in Perth guide provides indicative installed prices for gas storage, continuous-flow and heat pump systems.

Comparing these costs with the price of a repair can help you make an informed decision.


Local Hot Water Repairs in Ellenbrook & Surrounding Suburbs

Based in Ellenbrook, we provide suitable hot water repairs throughout nearby northern and northeastern Perth suburbs, including Ballajura, Midland, Aveley, The Vines, Jane Brook and surrounding areas.

Contact us to discuss your hot water problem and whether a repair or replacement is the most practical option.

Local Knowledge, Practical Advice

Whether your gas storage system needs a replacement valve or you’re concerned about an ageing hot water unit, we’ll help you determine the most practical next step.

We focus on straightforward communication, suitable repairs and reliable hot water solutions for local households.

Not sure whether we service your suburb?

Get in touch with your location, hot water system details and a description of the problem. We’ll let you know whether we can assist.


Frequently Asked Questions About Hot Water Repairs

If you no longer need natural gas, contact your existing gas retailer about meter removal, deregistration and closing your account.

For many homeowners, meter removal is sufficient. Permanent disconnection of the underground gas service is a separate process and may not be necessary.

Yes, depending on where the leak is coming from. Leaking valves, pipework and plumbing connections can often be repaired without replacing the hot water system.

However, if the storage tank itself is leaking, replacing the system is generally necessary.

A pilot light that won’t stay alight can indicate a faulty thermocouple, gas control or another issue with the heater.

Some faults are relatively straightforward to repair, while others require further investigation. If you smell gas, avoid attempting to relight the system and contact a licensed gas fitter or your gas emergency service.

That depends on the fault and the overall condition of the unit.

Replacing a relatively inexpensive valve may still make sense. However, a costly repair on an ageing tank can be difficult to justify when a new system provides a fresh manufacturer’s warranty.

We’ll help you compare the options before proceeding.

Repair costs depend on the type of system, the fault and the replacement parts required.

Some plumbing repairs are relatively straightforward, while gas control replacements and other major repairs can be considerably more expensive.

If you can tell us the make, model and symptoms, we may be able to provide an indicative cost before arranging a visit.

We repair common plumbing and gas storage faults across a range of established hot water brands.

However, some modern continuous-flow, heat pump and specialist systems require manufacturer-authorised technicians. We’ll let you know if your system is outside our repair scope.

We aim to respond to hot water problems as promptly as practical, with priority depending on the urgency of the situation and our existing commitments.

Some repairs can be completed during the initial visit, while others require replacement parts or additional arrangements.


Need Help With Your Hot Water System?

Whether you’ve lost hot water, noticed a leaking valve or have concerns about an ageing system, we’re happy to help you work out the next step.

Tell us a little about your hot water system and the problem you’re experiencing. We’ll let you know whether a repair is likely to be practical or if a replacement may be worth considering.

For a quicker assessment, please include:

  • Your suburb
  • The make and model of your hot water system, if known
  • A brief description of the problem
  • Photos of the system or fault, if available

Similar Posts