How Much it Cost to replace hot water system in Perth
Perth Plumbing
This is the most frequently asked questions is “How Much it Cost to replace hot water system in Perth, instantaneous hot water system Installation Prices & Gas storage hot water system cost to install. These are probably the most popular questions we get asked every day to day.
Due to popular demand, we thought it would be a good idea to address this question here in full detail:
In this article, we’re going to look at the main factors affecting the price of various hot water heater systems. We’ll look at different models and categories of and explain their Advantages and Disadvantages I will explain the basic costs of purchasing and installing a unit, but also cover some factors you may not have considered, such as site access.
There is seven main factor that determines Cost of hot water systems installation and upgrades in Perth.
Hot water unit and capacity type and size
There is 5 main type of gas hot water units are popular around Perth WA some of them called Electric storage, Gas storage, Soler hot water systems, instantaneous hot water systems, heat pump systems along with a variety of kind in each category. Here’s a summary. This table only includes the cost of the equipment only. Other factors and installation is additional costs.
Gas hot water System Perth Prices
| System Type | Avg. Minimum Price | Avg. Maximum Price |
| Electric – “Storage” type | $845 (25 L) | $1327 (160 L) |
| Electric – “Instant” type | $987 | $1300 |
| Gas – “Storage” type | $1227 | $1811 (330 L) |
| Gas – “Instant” type | $897 | $1972 |
| Solar – Roof Mounted | $3679 | $4530 |
| Solar – Split System (electric boost) | $3900 | $5000+ |
| Solar – Split System (gas boost) | $4900 | $6500+ |
| Heat Pump | $3300 (160 L) | $4000 (315 L) |
Gas & Electrical storage hot water systems Perth
Similarly to electric systems, gas storage heaters keep hot water stored in a tank; but use a gas burner for the process of heating the water. Compared to their electric counterparts, gas storage systems have quicker heat recovery times and generally use a smaller tank. Cost of these units are ranging from 1200$ to 1811$
Instantaneous hot water systems Cost
Gas instant water heaters are also available, where a gas burner only heats water on demand and does not store hot water in a tank, meaning your hot water won’t run out! Cost is around 897$ to 1972$
Solar Hot Water System Cost Perth
Increasingly, people are moving to solar-powered hot water, especially in the sunny parts of the country. These systems are more expensive to install, but save energy and money over the life of the system. Most solar systems need an electric or gas “assist” for days that are particularly overcast or cold.
Solar systems come in a few main varieties. Roof-mounted models are becoming more popular. Base prices for electric-boosted roof-mounted models range from about $3600 to $4400 or more. Electric-boosted systems with a tank on the ground (these are called a “split system”) are preferable when roofs can’t support the weight of a tank. These systems range from roughly $3900 to $5000 or more. Finally, a gas boosted split system starts at around $4900 and ranges up to $6500.
Heat Pump Prices
Like a solar system, a heat pump water heater is highly efficient. However, the approach is different. Instead of using solar energy, heat pump water heaters use air-conditioning technology to extract heat from the ambient air and use it to heat water.
These systems save money, but often require a warm or temperate climate and must be installed outdoors. They can also be noisy. Prices for a heat pump water system start at around $3300 for a 160L system, and range to roughly $4000 for a 315L heat pump.
Hot water systems installation cost in Perth WA
Installation cost can be varied job to job.also depend on the complexity of the job.
Typically speaking replacing the old system with new one same place it is relevantly cheaper ranging from 268$ to 673$
If additional valves are required, or if plumbing or electrical systems require upgrades, costs will be higher. As new law legislated in 2012 means that tempering valves must be fitted on every hot water system. These anti-scald devices regulate water temperature to 50 degrees. In most cases, the manufacturer warranty is void if these valves are not fitted. They cost an additional $197 to $247.
In the case of moving the hot water system to different place or location, cost will be determined by scope of the work has to be carried out.in this process there might be gas line extensions or upgrade etc. in this case no need to worry our plumber will advise you any additional cost up front before commencing a job so you will have great idea about costs up front.
Transportation cost
One of the small factor of delivery or transportation cost to sight. This cost depends on how big is the unit some units are 145 kg require 2 people to handle and some units are 15 kg easy enough to carry for one person
Access the site
one of the cost factors is how accessible the property. In some cases, an aid of equipment require as a crane for double story houses .hi pitch roof, in some cases unit has to be hung on the wall, of course, all this is an extra cost.
Dispose of the old unit
Usually a small cost of 53 $ for disposing of the old unit. However, at Perth plumbing, we will take the unit and dispose of it for you for free.
Number crunching
So when you crunch all the numbers together here is a reminder what you need to consider
1, Cost of the hot water system to buy
2, Deliver in Perth metro area
3, Complexity of the job
4, If require extra equipment and extra work to follow hot water legislation from Wa governing body.
5, Site Accessibility
